Tag: contract pitfalls

3 Additional Mistakes Contractors Should Avoid

We previously discussed three top contract pitfalls you should always remain aware of before entering into a construction contract. Here is a breakdown of three additional and more specific mistakes you should also try to avoid when negotiating a construction contract.

1. Limit your Indemnification Provision

The indemnification clause is one of the most crucial contract provisions that you should pay attention to. These clauses usually contain language such as “indemnify” or “hold harmless,” and they basically mean that the the person who provides indemnification, known as the indemnitor, will be responsible for any judgements or claims made to the party receiving the indemnification, called the indemnitee. It can also mean that the indemnitor, will be responsible for covering legal expenses incurred by the indemnitee.  Similarly, a “hold harmless” clause means that a party will waive any claims they may have against the other party or a right of recovery against a claim.

As a subcontractor or supplier, your negotiating power may be limited when it comes to indemnification provisions. If you decide to accept an indemnification clause in your contract, you should at least understand what it is your are agreeing to in terms of this important clause. If possible, try to limit your obligations regarding indemnification provisions to the extent of your own fault; this is called a limited form of indemnification. If that doesn’t work, another alternative is to attempt to have the other party agree to a mutual indemnification clause.

2. Do not waive your Lien or Bond Rights

Whatever you do, do NOT waive your ability to collect payment via a bond or lien. You might think this is an obvious “no-no,” but you’d be surprised by the amount of contractors or suppliers lacking bargaining power who will agree to it. However, under no conditions is waiving your lien or bond rights okay. If by any chance the project goes awry, a lien or a bond will probably be your only way to secure payment. Keep in mind that some states void these kinds of waivers, but not all states do. Some courts will enforce the waiver, even when the harsh consequences of the waiver are recognized.

3. Do not delay the start of the Warranty Period

If the contract you are about to enter includes a warranty, make sure that the warranty period begins when your work is complete, not when the project as a whole is complete. Contracts drafted by owner will often push to have the warranty start once the entire project is complete, so watch out. As a subcontractor or supplier you have no control over when the entire project is completed. Often times, projects run into different challenges and face unmet deadlines and delays. Therefore, if you agree to this kind of provision your warranty may take way longer than what you would like.

As mentioned before, avoiding these three common mistakes does not guarantee a conflict-free contract, but remember – it is all about keeping yourself as informed as possible so you can be prepared for any challenges that may lie ahead.

3 Common Mistakes Contractors Should Avoid

If you are a contractor, a subcontractor, or a supplier, it is crucial to fully comprehend a construction contract before your work begins. This includes understanding the meaning of potential consequences and repercussions of the contractual terms you are about to agree on. Failing to understand the agreement terms can lead to an unwanted legal dispute with financial and reputational damages. Before starting a project, any prudent construction company will first have their attorney look over the suggested contract’s terms and begin a negotiation dialogue, where language will be used to protect not just one party, but all parties. As always, there are several contract pitfalls you should be aware. This article focuses on three top traps you should try your best to avoid or negotiate before signing the contract.

1. Obtain all of the documents

Often times you will be signing a contract that does not include the full set of obligations that will apply to your work. Therefore, you must always remember to ask for the prime contract documents (and any addenda involved). The prime contract usually binds the general contractor to the owner, but it also binds you as the subcontractor or supplier, even if you are not a signatory in the main agreement. This “binding” usually happens due to a commonly-used “flow down” provision, which states the all contractual obligations that apply to the general contractor will flow down to everyone else working on the job. If you do not obtain the prime contract documents you may remain unaware of all the provisions, obligations, and limitations, how they work together, and how they may affect positively or negatively your work.

2. Review all Project Specifications

Another thing you want to keep a close eye on is language. Usually prime contracts and subcontracts include project specifications only by reference, so make sure you obtain the full specifications on the project and you review them before signing anything.

3. Be crystal clear

Lastly, watch out for any ambiguity in all of the documents you are about to sign. Avoid jargon like “customary,” because even though parties may verbally agree on what is customary in the business, when things get ugly, “customary” will become a puddled word with interpretations that only serve the party raising a claim against you. Therefore, eliminate vague language and stick to clear and defined terms.

Avoiding these three traps can’t guarantee a 100% iron-clad contract, but it can certainly inform and educate you and the potential risks that the project can involve you down the road, if anything goes wrong.